Lines of Code
[root]/Packages/Uintah/CCA/Ports
| Author | Changes | Lines of Code | Lines per Change |
|---|---|---|---|
| Totals | 96 (100.0%) | 911 (100.0%) | 9.4 |
| jas | 86 (89.6%) | 900 (98.8%) | 10.4 |
| luitjens | 8 (8.3%) | 6 (0.7%) | 0.7 |
| dav | 2 (2.1%) | 5 (0.5%) | 2.5 |
Remove Packages/
0 lines of code changed in 30 files:
Added a few debug streams. No longer profile fine tasks seperately from regular tasks.
0 lines of code changed in 2 files:
Fixed some memory access errors pointed out by valgrind.
1 lines of code changed in 2 files:
Added code to track processor neighborhoods. A processor neighborhood is defined as any processor that the running processor would have to communicate with during task graph execution.
4 lines of code changed in 2 files:
Small optimization.
1 lines of code changed in 1 file:
Turned on .ups validation... You need to update your .ups files and
the ups_spec.xml file now! If your problem specification is not
valid, sus will die (with an error message) immediately. You can
validate an .ups files with "sus -validate filename.ups".
M Core/Containers/StringUtil.h
M Core/Containers/StringUtil.cc
Utility function to print out a vector<string> as a single ',' separated string.
M Packages/Uintah/CCA/Components/MPM/PetscSolver.cc
* Comment.
M Packages/Uintah/Core/GeometryPiece/GeometryPieceFactory.cc
M Packages/Uintah/CCA/Components/SimulationController/SimulationController.cc
* Removed setting of writeMessages.
M Packages/Uintah/CCA/Components/Parent/ComponentFactory.h
M Packages/Uintah/CCA/Components/Parent/ComponentFactory.cc
* Don't pass in the name of (the type of) a component anymore... It is read from the .ups file now.
M Packages/Uintah/CCA/Components/Parent/Switcher.h
* Cosmetics
M Packages/Uintah/CCA/Components/Parent/Switcher.cc
* It is possible that I broke this... I think it is ok, but I'm going
to get this commit in so that the RT can take a look.
* Cosmetics
* Organize #includes.
* The ProblemSpec no longer comes from a port... Just hold onto it when Switcher is initialized.
M Packages/Uintah/CCA/Components/LoadBalancers/DynamicLoadBalancer.h
* Cosmetics - whitespace is your friend. :)
M Packages/Uintah/CCA/Components/LoadBalancers/DynamicLoadBalancer.cc
* Don't need two steps anymore to read a problem spec.
M Packages/Uintah/CCA/Components/DataArchiver/DataArchiver.cc
* Don't need two steps anymore to read a problem spec.
M Packages/Uintah/CCA/Components/Solvers/SolverFactory.cc
* <Solver>
<type>
replaced with:
<Solver type="">
M Packages/Uintah/CCA/Components/ProblemSpecification/ProblemSpecReader.h
* Major updates to ProblemSpec validation.
** Tracking the actual file that specific tags come from to better report errors to user.
** Don't 'create' a PSReader with a filename, just call readInputFile() with the filename.
Might should make readInputFile a static function, but haven't yet as I'm not sure
if it is used multiple times for the same ProbSpec.
** Prob Spec Reader now contains a list of all (xml) files that were read to create the PS.
* Functions used to pass in the tag (parent), but since they are part of the tag class, don't need
to do this. It is implicitly done (parent == this).
* Moved the Tag/Attribute structs out of the ProblemSpecReader class as they aren't really
a part of it, and are not needed anywhere but in ProblemSpecReader.cc.
* Remove #include sgi stuff.
M Packages/Uintah/CCA/Components/ProblemSpecification/ProblemSpecReader.cc
* Display filename and line number when errors are found.
** All tags are added to the main (top level) xml 'doc'ument. Because of this, the filename
of sub-docs was lost. I am catching this and using the *_private (part of an xml node)
to hold onto this info. I think this is ok as the xml documentation says that it is for
application use.
* Added need_applies_to and children requirements parsing.
* Fixed a couple of edge condition errors that could slip through the parsing.
* Consolidate the file name validation. First look for the file specified directly,
then look for it as a relative offest from its parents location,
then look for it as an absolute offset from where the program was run.
I think this covers all the cases that people use and that it makes sense
to do it this way.
M Packages/Uintah/CCA/Components/Arches/Arches.cc
* Made 'whichMMS' an attribute (instead of a separate <Tag>).
M Packages/Uintah/CCA/Components/Regridder/RegridderFactory.cc
* Changed <type> to be an attribute of <Regridder type="">.
M Packages/Uintah/CCA/Ports/ProblemSpecInterface.h
* Pass filename into readInputFile().
* Cosmetics
M Packages/Uintah/scripts/regression_tester
* Allow 'inputs' to be INPUTS to be local as well as in relative src location.
M Packages/Uintah/Core/DataArchive/DataArchive.cc
* One stop readInputFile().
* Catch edge error condition. (d_filebase == "")
M Packages/Uintah/Core/ProblemSpec/ProblemSpec.h
* Removed doWrite... as it wasn't (really) used anywhere, and I'm not sure what its purpose was.
* Cosmetics - whitespace is your friend
M Packages/Uintah/Core/ProblemSpec/ProblemSpec.cc
* Cosmetics - use '{}' and whitespace.
* removed d_write
M Packages/Uintah/StandAlone/tools/compare_mms/compare_mms.cc
M Packages/Uintah/StandAlone/tools/graphview/GV_TaskGraph.cc
M Packages/Uintah/StandAlone/slb.cc
M Packages/Uintah/StandAlone/restart_merger.cc
* One stop readInputFile()
M Packages/Uintah/StandAlone/tools/pfs/pfs.cc
M Packages/Uintah/StandAlone/tools/pfs/pfs2.cc
* One stop readInputFile()
* Removed writeMessages()... don't think it is used anywhere...
M Packages/Uintah/StandAlone/sus.cc
* Clean up 'usage'.
* No more "-mpm" or "-arches", etc... Specify in .ups file.
* FinalizeManager (finalize MPI) was needed in a number of error cases.
M Packages/Uintah/StandAlone/inputs/ups_spec.xml
Lots of updates... Needs a lot more work from those in the know.
Please fix all the FIXMEs. If a parameter is optional, please specify
why and/or its default. Also, make as many things 'REQUIRED' as
possible. Update the children and need_applies_to flags too.
Please put <tags> in ALPHABETICAL order... this will make it much
easier to find and verify them! Try to organize the large <tags> in
sections (as they apply to need_applies_to), but keep each section
alphabetical.
M Packages/Uintah/StandAlone/inputs/*/*.ups
* Updates to be closer to spec.
5 lines of code changed in 2 files:
Add the MIT License to every *.cc, *.h,*.F, and sub.mk file.
900 lines of code changed in 56 files:
Reverted a few patches from the last few months that were required due to an incorrect bug fix. The bug they were fixing still exists and i'm looking into a correct fix. Also disabled load balancing without regridding. The code should be working now.
0 lines of code changed in 1 file: