CIBC:Project:Power App
From NCRR Biomedical Software Development, Engineering, and Dissemination Wiki
Contents |
afront generated surfaces
Note: all statistics regarding the FE Tet meshes are reported from Verdict using the SCIRun bridge to Verdict.
Images
TetGen mesher -pqAAa200.0z (~3.21 mins)
- Number of Tet elements checked = 4133993
- Euler characteristics for this mesh indicate 0 holes in this block of elements.
(Assumes a single contiguous block of elements.)
- Element counts: Tets: 4133993 Faces: 8292237 Edges: 4860849 Nodes: 702606
- Aspect Ratio: Low = 1.00011, Average = 15.2247, High = 5.00456e+07
- Aspect Ratio (gamma): Low = 1.00079, Average = 2.18738, High = 12859.1
- Volume: Low = 1.74183e-07, Average = 4.96587, High = 267.951
- Condition: Low = 1.00009, Average = 1.74266, High = 11067.6
- Jacobian: Low = 1.0451e-06, Average = 29.7952, High = 1607.7
- Scaled_Jacobian: Low = 6.33094e-05, Average = 0.371769, High = 0.990632
- Shape: Low = 0.00182271, Average = 0.648091, High = 0.999912
- Shape_Size: Low = 0, Average = 0, High = 0
- Distortion: Low = 1, Average = 1, High = 1
TetGen mesher -pq1.0AAa200.0z (30 mins)
- Number of Tet elements checked = 12514089
- Euler characteristics for this mesh indicate 0 holes in this block of elements.
(Assumes a single contiguous block of elements.)
- Element counts: Tets: 12514089 Faces: 25063106 Edges: 14574288 Nodes: 2025272
- Aspect Ratio: Low = 1, Average = 12.8492, High = 7.48795e+07
- Aspect Ratio (gamma): Low = 1.00066, Average = 1.63764, High = 20491.9
- Volume: Low = 1.83958e-08, Average = 1.64046, High = 240.929
- Condition: Low = 1, Average = 1.43677, High = 17421.2
- Jacobian: Low = 1.10375e-07, Average = 9.84277, High = 1445.58
- Scaled_Jacobian: Low = 4.80254e-05, Average = 0.541553, High = 0.999044
- Shape: Low = 0.00133599, Average = 0.773061, High = 0.999999
- Shape_Size: Low = 0, Average = 0, High = 0
- Distortion: Low = 1, Average = 1, High = 1
CAMAL mesher (4.42 mins including JoinMesh on each tetvol)
- Number of Tet elements checked = 3415236
- Euler characteristics for this mesh indicate 2147483647 holes in this block of elements.
(Assumes a single contiguous block of elements.)
- Element counts: Tets: 3415236 Faces: 6837477 Edges: 3997659 Nodes: 575422
- Aspect Ratio: Low = 1.00002, Average = 1.32974, High = 1553.55
- Aspect Ratio (gamma): Low = 1.00069, Average = 1.37102, High = 74.7166
- Volume: Low = 3.23703e-06, Average = 6.01067, High = 1068.21
- Condition: Low = 1.00002, Average = 1.24125, High = 56.6776
- Jacobian: Low = 1.94222e-05, Average = 36.064, High = 6409.24
- Scaled_Jacobian: Low = 0.0070007, Average = 0.618421, High = 0.997181
- Shape: Low = 0.0563958, Average = 0.829903, High = 0.99998
- Shape_Size: Low = 0, Average = 0, High = 0
- Distortion: Low = 1, Average = 1, High = 1
marching cubes (SCIRun isosurface module) generated surfaces
Note: all statistics regarding the FE Tet meshes are reported from Verdict using the SCIRun bridge to Verdict.
At this time I cannot get a FE mesh generated including the Heart surface, (probably because the heart surface intersects the lungs somewhere) but below are the results for torso boundary, bones, and lungs. The results are still an interesting comparison.
Images
TetGen mesher -pqAAa200.0z (1:35 hours)
- Number of Tet elements checked = 14300408
- Euler characteristics for this mesh indicate 0 holes in this block of elements.
(Assumes a single contiguous block of elements.)
- Element counts: Tets: 14300408 Faces: 29156724 Edges: 17524972 Nodes: 2668657
- Aspect Ratio: Low = 1.00006, Average = 1.06422e+21, High = 1.45221e+28
- Aspect Ratio (gamma): Low = 1.00073, Average = 3.44334e+07, High = 3.81639e+14
- Volume: Low = 3.83988e-19, Average = 1.4405, High = 266.872
- Condition: Low = 1.00005, Average = 1.9262e+07, High = 2.33327e+14
- Jacobian: Low = 2.30393e-18, Average = 8.64298, High = 1601.23
- Scaled_Jacobian: Low = 1.40881e-15, Average = 0.37441, High = 0.995652
- Shape: Low = 1.90147e-10, Average = 0.635895, High = 0.999953
- Shape_Size: Low = 0, Average = 0, High = 0
- Distortion: Low = 1, Average = 1, High = 1
